Icom ID-51A

16
MENU SCREEN
16-57
Repeater Group (01 to 30)
Group name
Repeater group name of up to 16 alphanumeric charac-
ters
The Skip setting can be turned ON or OFF in the QUICK MENU screen.
Repeater List
<DV Repeater>
TYPE DV Repeater
NAME Repeater name of up to 16 alphanumeric characters
SUB NAME Repeater sub name of up to 8 alphanumeric characters
CALL SIGN Repeater call sign
GW CALL SIGN Gateway call sign
GROUP Repeater group where the repeater is assigned
USE(FROM)
Select whether or not to use the repeater as an access repeater
(FROM) in the DR function.
FREQUENCY Operating frequency of the access repeater
DUP Duplex setting to use the access repeater
OFFSET FREQ Frequency offset to use the access repeater
POSITION Position data accuracy level (“None,” “Approximate” or “Exact”)
LATITUDE* Latitude position of the repeater
LONGITUDE* Longitude position of the repeater
UTC OFFSET
Time difference between UTC (Universal Time Coordinated)
and the local time
NOTE: When the repeater is used for a simplex communication, refer to the
list below to set the settings.
<DV Simplex>
TYPE DV Simplex
NAME Enter the desired name of up to 16 alphanumeric characters
SUB NAME Enter the desired sub name of up to 8 alphanumeric characters
GROUP Set the desired repeater group
USE(FROM)
Select whether or not to use the repeater as an access repeater
(FROM) in the DR function
FREQUENCY Frequency to operate simplex
POSITION Position data accuracy level (“None,” “Approximate” or “Exact”)
LATITUDE* Latitude position of the access point
LONGITUDE* Longitude position of the access point
UTC OFFSET
Time difference between UTC (Universal Time Coordinated)
and the local time
■ DV Memory items (Continued)
* Appears when POSITION is set to “Approximate” or “Exact.”
Previous view