8
D-STAR OPERATION <BASIC>
8-6
2. Selecting the access repeater from the Near Re-
peater List
q Hold down
for 1 second.
• The DR screen appears.
w Push D-pad() to select “FROM,” and then push D-
pad(Ent).
e Push D-pad() to select “Near Repeater,” and then
push D-pad(Ent).
r Push D-pad() to select the desired type of nearby
repeater, and then push D-pad(Ent).
• Near Repeater (ALL):
Displays up to 20 nearby DV
and FM repeaters.
(A total of 40 repeaters)
• Near Repeater (DV): Displays up to 20 nearby
DV repeaters.
• Near Repeater (FM): Displays up to 20 nearby
FM repeaters.
r Push D-pad() to select the repeater, and then push
D-pad(Ent). (Example: “Hirano”)
• “Hirano” is displayed in “FROM.”
NOTE: When the position data accuracy level is set
to “Approximate,” the direction data is not displayed if
the distance to the repeater is under 5 kilometers (3.1
miles). (p. 9-33)
Completed
Shows the distance
and direction from your
position to the repeater
Shows the call sign
of “Hirano430”
NOTE:
When using the Repeater Search function, be sure to
first receive your own position data.
• If no repeater is found in
a 160 kilometer (100 mile)
range, screen 1, as shown
to the right, will be dis-
played.
• If the last received position
can be used, screen 2, as
shown to the right, will be
displayed.
Screen 1
Screen 2
■ Setting “FROM” (Access repeater)
D Using the Repeater Search function (Continued)
Appears for
FM repeaters
To Next Page
Loading...
Need help?
General
