8
D-STAR OPERATION <BASIC>
8-23
☞ Continued on the next page
Select the file
to be loaded
Select
5. Updating the Repeater List
u Push [MENU]
.
i Push D-pad() to select the root item (“SD Card”),
and then push D-pad(Ent).
o Push D-pad() to select “Load Setting,” and then
push D-pad(Ent).
!0 Push D-pad() to select the ICF file to be loaded,
and then push D-pad(Ent).
(Example: Selecting “51P2_USA_160913.icf”)
• The LOAD FILE screen appears.
!1 Push D-pad() to select “Repeater List Only,” and
then push D-pad(Ent).
■ Updating the Repeater List (Continued)
To Next Page
Loading...
