Intel Cyclone 10 GX User Manual

Figure 114. Connection Guidelines for a PCS Direct PHY Design
PLL IP Core
Data
Generator
Data
Verifier
Cyclone 10 GX Transceiver Native PHY
Reset Controller
rx_cdr_refclk
tx_serialclk0
pll_locked
pll_sel
reset
clk
pll_refclk
tx_ready
rx_ready
tx_parallel_data
tx_clkout
rx_parallel_data
rx_clkout
tx_serial_data
rx_serial_data
rx_is_lockedtodata rx_cal_busy tx_cal_busy tx_analogreset tx_digitalreset rx_analogreset rx_digitalreset
pll_cal_busy
8. Simulate your design to verify its functionality.
2.10. Simulating the Transceiver Native PHY IP Core
Use simulation to verify the Native PHY transceiver functionality. The Quartus Prime
software supports register transfer level (RTL) and gate-level simulation in both
ModelSim
®
- Intel FPGA Edition and third-party simulators. You run simulations using
your Quartus Prime project files.
2. Implementing Protocols in Intel Cyclone 10 GX Transceivers
UG-20070 | 2018.09.24
Intel
®
Cyclone
®
10 GX Transceiver PHY User Guide
Send Feedback
186

Intel Cyclone 10 GX Specifications

General

Brand	Intel
Model	Cyclone 10 GX
Category	Transceiver
Language	English