Lexmark CX310 Service Manual

Actions Yes No
Step 4
Properly connect the cables to the RIP board. Restart the device into
diagnostic mode.
Does the 900.xx error reoccur during startup?
Go to step 5. Go to step 6.
Step 5
Replace the RIP board, and restart the device.
Does this fix the problem?
Note: If an error, different from the original 900.xx, is displayed, then
consult the service check for that error.
Problem resolved. Go to step 31.
Step 6
Print the following:
• Error log
• Menu settings page
• Network settings page
Does the 900.xx error reoccur while these pages are printing?
Go to step 31. Go to step 7.
Step 7
Reattach the communications cable. Restart the printer to operating
mode. Send the printer a print job.
Does the 900.xx error reoccur?
Note: Before performing this step, write down this information about
the file being sent to the printer:
• Application used
• Operating system
• Driver type
• File type (PCL, PostScript, XPS, etc.)
Go to step 8. Go to step 10.
7527
Diagnostic information
108

Lexmark CX310 Specifications

General

Print Technology	Laser
Scan Technology	CIS
Scan Resolution	Up to 600 x 600 dpi
Duplex Printing	Manual
Display	2.4-inch color LCD
Processor Speed	800 MHz
Standard Memory	256 MB
Fax Speed	33.6 Kbps
Operating System Compatibility	Windows, Mac OS, Linux
Print Resolution	Up to 600 x 600 dpi
Connectivity	USB, Ethernet
Standard Paper Input	250 sheets
Scanner Type	Flatbed, ADF
Fax Resolution	300 x 300 dpi
Paper Capacity	250 sheets
Network Connectivity	Ethernet
Copy Speed	Up to 22 cpm (black), Up to 18 cpm (color)