# Use the To
1 Display
• Views printing, copying, e‑mailing, faxing, and scanning options
• Views the printer status and error messages
2 Home button Goes to the home screen
3 Sleep button Enables Sleep mode or Hibernate mode
4 Keypad Enters numbers, letters, or symbols
5 Indicator light Checks the status of the printer
6 Start button Starts a job, depending on which mode is selected
7 Stop or cancel button Cancels all printer activity
8 Clear all/Reset button Resets the default settings of a function, such as printing, copying, or e‑mailing
Understanding the colors of the indicator light and Sleep button lights
The colors of the indicator light and Sleep button lights on the printer operator panel signify a certain printer status or
condition.
Indicator light Printer status
Off The printer is off or in hibernation mode.
Blinking green The printer is warming up, processing data, or printing.
Solid green The printer is on, but idle.
Blinking red The printer requires user intervention.
Sleep button light Printer status
Off The printer is idle or in Ready state.
Solid amber The printer is in Sleep mode.
Blinking amber The printer is waking from entering hibernation mode.
Blinking amber for 0.1 second, then goes completely off for 1.9
seconds in pulsing pattern.
The printer is in hibernation mode.
Understanding the home screen for CX410 and CX510 models
When the printer is turned on, the display shows a basic screen, referred to as the home screen. Use the home screen
buttons and icons to initiate an action such as copying, faxing, or scanning; to open the menu screen; or to respond to
messages.
Note: You home screen may vary depending on your home screen customization settings, administrative setup, and
active embedded solutions.
7527
Service menus
187
To Next Page
Loading...
