Lexmark CX310 Service Manual

97y errors
97y error messages
Error code Description Action
975.xx
975.xx
Network error: unrecognizable network port. Replace the standard network card or the card
in the specified slot.
976.xx Unrecoverable software or error in network or
network card x.
Go to
“Standard network/network card error
service check” on page 117.
978.xx Bad checksum while programming Standard
Network or Network Card x port.
Go to
“Standard network/network card
programming error service check” on
page 117.
979.xx Flash parts failed while programming the
Standard Network or Network Card x port.
Go to
“Standard network/network card error
service check” on page 117.
Standard network/network card error service check
Action Yes No
Step 1
Is the network card installed?
Go to step 2. Go to step 3.
Step 2
Make sure that the network card is installed correctly. If not, then reinstall
the card.
Does this solve the problem?
The problem is solved. Contact the next level
of support.
Step 3
Replace the controller board.
Does this solve the problem?
The problem is solved. Contact the next level
of support.
Standard network/network card programming error service check
Action Yes No
Step 1
Make sure that you have downloaded the code in binary mode and not in
ASCII, and then reprogram the network card.
Does this solve the problem?
The problem is solved. Go to step 2.
Step 2
Is the network card installed?
Go to step 3. Go to step 4.
7527
Diagnostic information
117

Lexmark CX310 Specifications

General

Print Technology	Laser
Scan Technology	CIS
Scan Resolution	Up to 600 x 600 dpi
Duplex Printing	Manual
Display	2.4-inch color LCD
Processor Speed	800 MHz
Standard Memory	256 MB
Fax Speed	33.6 Kbps
Operating System Compatibility	Windows, Mac OS, Linux
Print Resolution	Up to 600 x 600 dpi
Connectivity	USB, Ethernet
Standard Paper Input	250 sheets
Scanner Type	Flatbed, ADF
Fax Resolution	300 x 300 dpi
Paper Capacity	250 sheets
Network Connectivity	Ethernet
Copy Speed	Up to 22 cpm (black), Up to 18 cpm (color)