Lexmark CX310 - Rear Scanner Cover Removal; Flatbed Scanner Assembly Removal

Rear scanner cover removal
1 Remove the two screws (A) from the rear scanner cover.
2 Use a flat‑blade screwdriver to pry the bottom part of the cover out first.
3 Remove the rear scanner cover.
Flatbed scanner assembly removal
1 Remove the waste toner bottle. See “Waste toner bottle removal” on page 271.
2 Remove the right cover assembly. See “Right cover assembly removal” on page 256.
3 Lift the ADF assembly.
7527
Repair information
333