Lexmark CX310 Service Manual

Appendix A: Printer specifications
• “Power specifications” on page 383
• “Electrical specifications” on page 383
• “Operating clearances” on page 384
• “Acoustics” on page 385
• “Environment” on page 386
• “Processor” on page 386
Power specifications
The average nominal power requirements for the base printer configuration are shown in the following table (power
levels are shown in watts):
Note: Some modes may not apply to all models.
Printing states Power
Off 0.0W
Sleep Mode 7W
Hibernate Mode 1W
Standby Mode 50W
Ready Mode 40W
Simplex printing 500W
Duplex printing 550W
Maximum current shown in amp ergs.
Notes:
• Using a power converter or inverter is not recommended.
• The CX310, CX410, and CX510 models are ENERGY STAR Qualified.
• All models ship with Sleep Mode set to On.
Electrical specifications
Low-voltage models
• 100 to 127 V ac at 50 to 60 hertz (Hz) nominal
• 90 to 137 V ac, extreme
High-voltage models
• 220 to 240 V ac at 50 to 60 hertz (Hz) nominal (not available in all countries and regions)
7527
Appendix A: Printer specifications
383

Lexmark CX310 Specifications

General

Print Technology	Laser
Scan Technology	CIS
Scan Resolution	Up to 600 x 600 dpi
Duplex Printing	Manual
Display	2.4-inch color LCD
Processor Speed	800 MHz
Standard Memory	256 MB
Fax Speed	33.6 Kbps
Operating System Compatibility	Windows, Mac OS, Linux
Print Resolution	Up to 600 x 600 dpi
Connectivity	USB, Ethernet
Standard Paper Input	250 sheets
Scanner Type	Flatbed, ADF
Fax Resolution	300 x 300 dpi
Paper Capacity	250 sheets
Network Connectivity	Ethernet
Copy Speed	Up to 22 cpm (black), Up to 18 cpm (color)