Lexmark T652 - Page 139

Error code Description Action
27x.50 Left tamper does not leave home position failure
(oset stacker)
The sensor (left tamper HP) does not detect that
the tamper has moved from home position.
Go to
“Left tamper does not leave home
position failure (oset stacker) service check”
on page 142.
27x.51 Sensor (output pass through) late jam (mailbox)
The media is late reaching the sensor (output pass
through) within the specified time.
Go to
“Sensor (output pass through) late jam
service check” on page 157.
27x.52 Sensor (mailbox empty) lingering jam
The media reached the sensor (mailbox empty)
but did not clear it in the specified time.
Go to
“Sensor (mailbox empty) lingering jam
service check” on page 142.
27x.53 Sensor (mailbox empty) late jam
The media is late reaching the sensor (mailbox
empty) within the specified time.
Go to
“Sensor (mailbox empty) late jam service
check” on page 143.
27x.54 Sensor (output pass through) lingering jam
(mailbox)
The media reached the sensor (output pass
through) but did not clear it in the
specified
time.
Go to
“Sensor (output pass through) lingering
jam service check” on page 139.
27x.55 Sensor (mailbox empty) lingering jam
The media reached the sensor (mailbox empty)
but did not clear it in the specified time.
Go to
“Sensor (mailbox empty) lingering jam
service check” on page 142.
27x.58 Sensor (output pass through) late jam (mailbox,
high capacity stacker, oset stacker, and output
expander)
The media is late reaching the sensor (output pass
through) within the specified time.
Go to
“Sensor (output pass through) late jam
service check” on page 157.
Sensor (output pass through) lingering jam service check
Action Yes No
Step 1
Remove, and then reinstall the output option.
Does the problem remain?
Go to step 2. Problem is solved.
Step 2
Remove obstructions between the sensor (output pass through)
machine and the media bin in the media path.
Does the problem remain?
Go to step 3. Problem is solved.
4062
Diagnostic information
139