LSIS LSLV0055H100-4COFN - Multi-Step Acc;Dec Time Configuration

113
Learning Basic Features
4.10.3 Multi-step Acc/Dec Time Configuration
Acc/Dec times can be configured via a multi-function terminal by setting the ACC
(acceleration time) and DEC (deceleration time) codes in the DRV group.
Group
Cod
e
Name
LCD Display
Parameter Setting
Setting Range
Unit
DRV
03
Acceleration time
Acc Time
20.0
0.0–600.0
sec
04
Deceleration time
Dec Time
30.0
0.0–600.0
sec
BAS
70–
83
Multi-step
acceleration/Decele
ration time1–7
Acc Time 1–7
x.xx
0.0–600.0
sec
Dec Time 1–7
x.xx
0.0–600.0
sec
IN
65–
71
Px terminal
configuration
Px Define
(Px: P1–P7)
11
XCEL-L
0–55
-
12
XCEL-M
13
XCEL-H
89
Multi-step
command delay
time
In Check
Time
1
1–5000
ms
Acc/Dec Time Setup via Multi-function Terminals – Setting Details
Code
Description
BAS-70–82
Acc Time 1–7
Set multi-step acceleration time1–7.
BAS-71–83
Dec Time 1–7
Set multi-step deceleration time1–7.
IN-65–71
Px Define (P1–
P7)
Choose and configure the terminals to use for multi-step Acc/Dec time
inputs
Configuration
Description
11
XCEL-L
Acc/Dec command-L
12
XCEL-M
Acc/Dec command-M
13
XCEL-H
Acc/Dec command-H
Acc/Dec commands are recognized as binary code inputs and will control
the acceleration and deceleration based on parameter values set with
BAS-70–82 and BAS-71–83.
If, for example, the P6 and P7 terminals are set as XCEL-L and XCEL-M
respectively, the following operation will be available.