LSIS LSLV0055H100-4COFN - Timer Settings

259
Learning Advanced Features
Group
Code
Name
LCD Display
Parameter Setting
Setting
Range
Unit
Pump
6
Vacuum
Pump
7
Constant
Torq
Macro Selection Details
Code
Description
CNF-43 Macro
Select
A list of Macro settings is displayed for user selection. When a Macro
function is selected, all the related parameters are automatically changed
based on the inverter‘s Macro settings.
If ‗0 (Basic)‘ is selected, all the inverter parameters, including the
parameters controlled by the Macro function, are initialized.
For other macro application settings (settings 1–7), refer to 5.42 Macro
Selection on page 258.
5.43 Timer Settings
Set a multi-function input terminal to a timer. Sets the On/Off controls to the multi-function
outputs and relays according to the timer settings.
Group
Code
Name
LCD Display
Parameter
Setting
Setting
Range
Unit
IN
65–71
Px terminal
configuration
Px Define (Px:
P1–P7)
35
Timer In
0-55
-
OUT
31
Multi-function relay 1
Relay 1
22
Timer
Out
0-41
-
33
Multi-function output
1
Q1 Define
55
Timer on delay
TimerOn Delay
3.00
0.00–
100.00
sec
56
Timer off delay
TimerOff Delay
1.00
0.00–
100.00
sec