LSIS LSLV0055H100-4COFN - Low Battery Voltage Warning

Learning Protection Features
334
Code
Description
[Example 2]
• T_acc: Acceleration time to set frequency
• T_steady: Constant speed operation time at set frequency
• T_dec: Deceleration time to a frequency lower than constant speed
operation or the stop time from constant speed operation frequency
• T_stop: Stop time until operation resumes
Do not set the braking resistor to exceed the resistor‘s power rating. If overloaded; it can
overheat and cause a fire. When using a resistor with a heat sensor, the sensor output can be
used as an external trip signal for the inverter‘s multi-function input.
6.2.6 Low Battery Voltage Warning
The H100 series has a battery low voltage warning feature. If the low battery voltage
warning function is set to ‗Yes,‘ a low battery voltage warning occurs when the battery
voltage is lower than 2 V (normal voltage is 3 V). Replace the battery when the low battery
warning is displayed.
Group
Code
Name
LCD Display
Parameter
Setting
Setting Range
Unit
PRT
90
Low battery
voltage
detection
Low Battery
0
No
0
No
-
1
Yes