• It is not necessary to use option type dynamic braking unit for H100
0.75~18.5kW(200V) and 0.75~30kW(400V) because basically the dynamic braking
unit is built in.
• You must refer to dynamic braking unit manual for usage recommended dynamic
braking unit in the table above due to changeable table.
• Resistance/watt/breaking torque/%ED of DB Resistor for Type A DB Unit refer to the
table of ―11.7.6 DB Resistors" and Resistance of DB Resistor for type B and C refer to
the manual of DB Unit.
11.7.2 Terminal arrangement
Group 1:
Group 2:
Terminal for connection with B2 of DBU
Terminal for connection with B1 of DBU
Terminal for connection with N of Inverter
Terminal for connection with P1 of Inverter
* Note: READ DBU User manual certainly when selecting DB resistors.
Group 3:
Group 4:
To Next Page
Loading...
