LSIS LSLV0055H100-4COFN - Fault;Warning List

345
Learning Protection Features
6.5 Fault/Warning List
The following list shows the types of faults and warnings that can occur while using the
H100 inverter. For details, refer to 6 Learning Protection Features on page 317.
Category
LCD Display
Details
Major fault
Latch type
Over Current1
Over current trip
Over Voltage
Over voltage trip
External Trip
Trip due to an external signal
NTC Open
Temperature sensor fault trip
Over Current2
ARM short current fault trip
Option Trip-x*
Option fault trip*
Over Heat
Over heat fault trip
Out Phase Open
Output open-phase fault trip
In Phase Open
Input open-phase fault trip
Ground Trip
Ground fault trip
Fan Trip
Fan fault trip
E-Thermal
Motor overheat fault trip
IO Board Trip
IO Board connection fault trip
No Motor Trip
No motor fault trip
Low Voltage2
Low voltage fault trip during operation
ParaWrite Trip
Write parameter fault trip
Pipe Broken
Pipe Break fault trip
Damper Err
Damper Err trip
Over Load
Motor overload fault trip
Under Load
Motor under load fault trip
CleanRPTErr
Pump clean trip
Level Detect
Level detect trip
MMC Interlock
MMC Interlock trip
Inverter OLT
Inverter overheating trip
Termal Trip
Motor overheating trip
Lost Keypad
Lost keypad trip
Broken Belt
Broken belt trip