Table of Contens
1 Preparing the Installation .................................................................................. 1
1.1 Product Identification ................................................................................. 1
1.2 Part Names ................................................................................................ 3
1.3 Installation Considerations ........................................................................ 5
1.4 Selecting and Preparing a Site for Installation ........................................ 6
1.5 Cable Selection ....................................................................................... 10
2 Installing the Inverter ....................................................................................... 14
2.1 Mounting the Inverter .............................................................................. 16
2.2 Enabling the RTC (Real-Time Clock) Battery ........................................ 19
2.3 Cable Wiring ............................................................................................ 22
2.4 Post-Installation Checklist ....................................................................... 43
2.5 Test Run ................................................................................................... 45
3 Learning to Perform Basic Operations ........................................................ 48
3.1 About the Keypad .................................................................................... 48
3.1.1 Operation Keys ........................................................................... 48
3.1.2 About the Display ........................................................................ 50
3.1.3 Display Modes ............................................................................ 54
3.2 Learning to Use the Keypad ................................................................... 58
3.2.1 Display Mode Selection .............................................................. 58
3.2.2 Operation Modes ........................................................................ 59
3.2.3 Switching between Groups in Parameter Display Mode ......... 61
3.2.4 Switching between Groups in User & Macro Mode ................. 62
3.2.5 Navigating through the Codes (Functions) ............................... 63
3.2.6 Navigating Directly to Different Codes....................................... 65
3.2.7 Parameter Settings available in Monitor Mode ......................... 66
3.2.8 Setting the Monitor Display Items .............................................. 68
3.2.9 Selecting the Status Bar Display Items ..................................... 69
3.3 Fault Monitoring ....................................................................................... 71
3.3.1 Monitoring Faults during Inverter Operation ............................. 71
3.3.2 Monitoring Multiple Fault Trips ................................................... 72
3.4 Parameter Initialization ............................................................................ 73
4 Learning Basic Features ................................................................................. 75
4.1 Switching between the Operation Modes (HAND / AUTO / OFF) ....... 78
4.2 Setting Frequency Reference ................................................................ 83
4.2.1 Keypad as the Source (KeyPad-1 setting) ................................ 84
To Next Page
Loading...
Need help?
General
