Learning to Perform Basic Operations
3.3.2 Monitoring Multiple Fault Trips
The following example shows how to monitor multiple faults that occur at the same time.
• If multiple fault trips occur at the same time, the
number of fault trips occurred is displayed on the
right side of the fault trip type.
• Press the [PROG/ENT] key to view the list of all the
fault trips.
• The list of all the fault trips is displayed.
• Press the [Down] key to view the types of fault trips
that occurred.
• Press the [Right] key to display the fault trip
information.
• When the inverter is reset and the fault trip is
released, the keypad display returns to the screen it
was at when the fault trip occurred.
To Next Page
Loading...
