LSIS LSLV0055H100-4COFN - Config (CNF) Mode

257
Learning Advanced Features
Code
Description
settings on the motor have been made. The Keypad will return
to a monitoring display. Now the motor can be operated with the
command source set at DRV-06.
Use caution when turning on the inverter after Easy Start On configuration. If codes such as
PRT-08 (Reset Restart), COM-96 (PowerOn Resume), or CON-71 (SpeedSearch) are
configured in Easy Start On, the inverter may start operating as soon as it is powered on.
5.41 Config (CNF) Mode
The config mode parameters are used to configure keypad related features.
Group
Code
Name
LCD Display
Parameter
Setting
Setting
Range
Unit
CNF*
2
LCD brightness/contrast
adjustment
LCD Contrast
-
-
10
Inverter S/W version
Inv S/W Ver
x.xx
-
11
Keypad S/W version
Keypad S/W Ver
x.xx
-
-
12
Keypad title version
KPD Title Ver
x.xx
-
-
30–32
Power slot type
Option-x Type
None
-
-
44
Erase trip history
Erase All Trip
No
-
-
60
Add title update
Add Title Up
No
-
-
62
Initialize accumulated
electric energy
WH Count Reset
No
-
-