LSIS LSLV0055H100-4COFN - Auto Restart Settings

Learning Advanced Features
240
Select the Speed search function (normal acceleration) for a proper re-operation during a free-
run.
If the speed search function (normal acceleration) is not selected during the acceleration, an
over current trip or an overload trip may occur.
5.28 Auto Restart Settings
When inverter operation stops due to a fault and a fault trip is activated, the inverter
automatically restarts based on the parameter settings.
Group
Code
Name
LCD Display
Parameter
Setting
Setting
Range
Unit
PRT
08
Select start at trip reset
RST Restart
11
-
-
09
Auto restart count
Retry Number
6
0–10
-
10
Auto restart delay time
Retry Delay
1.0
0.1–60.0
sec
CON
71
Select speed search
operation
Speed
Search
-
0000–1111
bit
72
Speed search startup
current
SS Sup-
Current
90
70–120
%
73
Speed search proportional
gain
SS P-Gain
100
0–9999
74
Speed search integral gain
SS I-Gain
200
0–9999
75
Output block time before
speed search
SS Block
Time
1.0
0.0–60.0
sec
Auto Restart Setting Details
Code
Description
PRT-08
RST Restart
The Reset restart function can be performed by one of the two different
types.
If the top segment is turned on, it indicates the function is on. If the bottom
segment is turned on, it indicates the function is off.
Type
Bit On
Bit Off