LSIS LSLV0055H100-4COFN - Page 154

Learning Basic Features
140
Multi-function Input Terminal Control Setting Details
Code
Description
IN-85 DI On
Delay, IN-86 DI
Off Delay
If the input terminal‘s state is not changed during the set time, when the
terminal receives an input, it is recognized as On or Off.
IN-87 DI NC/NO
Sel
Select terminal contact types for each input terminal. The position of the
indicator light corresponds to the segment that is on as shown in the table
below. With the bottom segment on, it indicates that the terminal is
configured as a A terminal (Normally Open) contact. With the top segment
on, it indicates that the terminal is configured as a B terminal (Normally
Closed) contact. Terminals are numbered P1–P7, from right to left.
Type
B terminal status (Normally
Closed)
A terminal status (Normally
Open)
Keypad
IN-90 DI Status
Display the configuration of each contact. When a segment is configured as
A terminal, using DRV-87, the On condition is indicated by the top segment
turning on. The Off condition is indicated when the bottom segment is
turned on. When contacts are configured as B terminals, the segment lights
behave conversely. Terminals are numbered P1–P7, from right to left.
Type
A terminal setting (On)
A terminal setting (Off)
Keypad