LSIS LSLV0055H100-4COFN - Page 233

219
Learning Advanced Features
Code
Description
1
MM/DD/YYYY
Month/Day/Year is displayed (USA).
2
DD/MM/YYYY
The format of Day/Month/Year is displayed
(Europe).
AP3-10 Period Status
Bits 0–3 are used to indicate the time module that is currently in use
among the 4 different time modules set at AP3-11–AP3-22.
Bits 4–11 are used to indicate the exception day that is set at AP3-30–
AP3-53.
AP3-11–AP3-20
Period 1–4 Start T
The start time for the 4 time periods can be set up to 4.
AP3-12–AP3-21
Period 1–4 STop T
The end time for the 4 time periods can be set up to 4.
AP3-13–AP3-22
Period 1~4 Day
The Time period date for the operation can be set up to 4. It can be set
on a weekly basis. If the bit is ‗1 (on)‘, it indicates the relevant day is
selected. If the Bit is ‗0 (off)‘, it indicates the relevant day is not
selected.
Bit
6
5
4
3
2
1
0
Sunday
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
AP3-30–AP3-51
Exception1–8 Start T
The operation start time for the 8 Exception days can be set.
AP3-31–AP3-52
Exception1–8 Stop T
The operation end time for the 8 Exception days can be set.
AP3-32–AP3-53
Exception1–8 Date
The date for the 8 Exception days can be set.
AP3-70 Time Event
En
Enables or disables the Time Event
Setting
Function
0
No
Time Event is not used.
1
Yes
Time Event is used.
AP3-71 T-Event
Status
It shows which T-Event from 1–8 is being performed.
7
6
5
4
3
2
1
0
T-
Event
8
T-
Event
7
T-
Event
6
T-
Event
5
T-
Event
4
T-
Event
3
T-
Event
2
T-
Event
1
AP3-72–86 T-Event1–
8 Period
Select the desired module of the Time Module and Exception Day set
in AP3-11–AP3-53 for the relevant events.
If the bit is 1, it indicates the relevant Time Module or Exception Day is
selected. If the Bit is 0, it indicates the Time Module or Exception Day