LSIS LSLV0055H100-4COFN - Page 300

Learning Advanced Features
286
It is used to set a motor to the smallest number among Drives not inter-locked by [AP1-43 Starting
Aux] and place others in order based on it when operating time of every motor is deleted through
<1:All> of [AP1-98 AuxRunTime Clr].
In case that operating time of each motor is deleted through <2: Aux1> ~ <6: Aux5> of [AP1-98
AuxRunTime Clr] or changed by combining [AP1-96 AuxRunTime Day] and [AP1-97 AuxRunTime
Min], motor stopped changes the priority with motor stopped as operating motor does with
operating motor.
The table below shows the case to change the operating time of Aux Motor2 running on the same
condition of Sequence1.
Sequences
Aux Priority 1
(Operating time:
min)
Aux Priority 2
(Operating time:
min)
Aux Priority 3
(Operating time:
min)
Aux Priority 4
(Operating time:
min)
Aux Priority 5
(Operating time:
min)
1
Aux Motor3 (00:30)
<Operating>
Aux Motor2 (00:40)
<Operating>
Aux Motor1 (00:50)
<Operating>
Aux Motor4 (01:30)
<Operating>
Aux Motor 5 (01:50)
<Operating>
Set <3 Aux2of [AP1-98 AuxRunTime Clr]
2
Aux Motor2 (00:00)
<Operating>
Aux Motor3 (00:30)
<Operating>
Aux Motor1 (00:50)
<Operating>
Aux Motor4 (01:30)
<Operating>
Aux Motor 5 (01:50)
<Operating>
Set time of Aux2to 2:00 through [AP1-97 AuxRunTime Min]
3
Aux Motor3 (00:30)
<Operating>
Aux Motor1 (00:50)
<Operating>
Aux Motor2 (02:00)
<Operating>
Aux Motor4 (01:30)
<Stopping>
Aux Motor 5 (01:50)
<정지상태>
The table below shows the case to change the operating time of Aux Motor5 stopped on the same
condition of Sequence1
Sequences
Aux Priority 1
(Operating time:
min)
Aux Priority 2
(Operating time:
min)
Aux Priority 3
(Operating time:
min)
Aux Priority 4
(Operating time:
min)
Aux Priority 5
(Operating time:
min)
1
Aux Motor3 (00:30)
<Operating>
Aux Motor2 (00:40)
<Operating>
Aux Motor1 (00:50)
<Operating>
Aux Motor4 (01:30)
<Stopping>
Aux Motor 5
(01:50)
<Stopping>