LSIS LSLV0055H100-4COFN - Page 330

Learning Advanced Features
316
Group
Code
Name
LCD Display
Parameter
Setting
Setting
Range
Unit
COM
96
Automatic restart of the
communication restart
PowerOn
Resume
0
No
0–1
-
• If proper communication is unavailable after the instantaneous power interruption, even
if the COM-96 PowerOn Resume function is set to ‗Yes,‘ do not operate the inverter.
• The Power-on Run function operates separately (Power-on Run function and PowerOn
Resume function is set to ‗Yes‘ and power turns off and turns on, inverter maintains for
the time set in Power-on run function and then, by the Power On Resume function, if
the inverter is in operation by the communication command before the power
interruptions, the inverter is in operation after the power recovery.)