4 If the inver ter is operating in AUTO mode, press the [AUTO] key once on the keypad to
operate the inverter in the forward (Fx) direction.
5 Observe the motor‘s rotation from the load side and ensure that the motor rotates
counterclockwise (forward).
• Check the parameter settings before running the inverter. Parameter settings may have to
be adjusted depending on the load.
• To avoid damaging the inverter, do not supply the inverter with an input voltage that
exceeds the rated voltage for the equipment.
• Before running the motor at maximum speed, confirm the motor‘s rated capacity. As
inverters can be used to easily increase motor speed, use caution to ensure that motor
speeds do not accidently exceed the motor‘s rated capacity.
To Next Page
Loading...
