LSIS LSLV0055H100-4COFN - Page 67

Learning to Perform Basic Operations
53
No.
Name
Description
5
Operating status
Displays one of the following operation states:
STP: Stop
FWD: Forward operation
REV: Reverse operation
: Forward command given
: Reverse command given
DC: DC output
WAN: Warning
STL: Stall
SPS: Speed search
OSS: S/W over current protection is on
OSH: H/W overcurrent protection
TUN: Auto tuning
PHT: Pre-heat
FIR: Fire mode operation
SLP: Sleep mode operation
LTS: Load tuning
CAP: Capacity diagnostics
PCL: Pump clean
6
Display item
Displays the value of a monitor display item selected at
CNF-20 (Anytime Para).
7
Parameter value
Displays the parameter value of currently selected code.
8
Setting range
Displays the value range for the selected parameter.
9
Set value
Displays the currently set value for the code.
10
Default
Displays the factory default value for the code.
11
Code no. and name
Displays the number and name of the currently selected
code.