6.1.3. Executor Bar
The Executor Bar is always visible on the bottom of screen 2 and all further wing screens.
The executor bar displays information about the stored executor.
The top of the executor bar displays the current page and if an executor is fixed from another page.
The executor bar can have up to 999 pages.
To switch between the pages: Press Page + or Page - .
The executor color displays which kind of executor it is.
The executor bar is fragmented in the main executor (right), 12 normal executor buttons (first two lines) and 6 fader
executor buttons (bottom line).
If you store a cue on a executor, the console asks to label the executor.
If you don´t tap the label pop-up, the executor is called Exec.
The blue bar displays the fade time of a cue from 0 % to 100 %.
To open the executor bar window, tap in the executor bar.
Main Executor
Rightmost of the executor bar is displayed the main executor along with the two 100 mm faders.
At first is the trigger icon displayed, then the cue number along with the cue name.
The first fader bar displays the position of the master fader and the second one of the XFader.
The current cue is displayed in the second line, that the cue before and afterwards are visible.
If the executor is on, the executor button is highlighted and the current cue is displayed in the second line in white.
If the executor is off, in the second line is an [Off] displayed.
To Next Page
Loading...