To import another fixture type from the library into the show file, which is not in the drop down list, tap
Select other... on the right.
It opens the Import Fixture Type Window.
Quantity:
This edit line displays how many fixtures will be created.
To select the quantity, tap the plus or minus.
ID:
This edit line displays the next available fixture ID.
To select a fixture ID, tap the plus or minus.
To get an overview about assigned and available fixture IDs, tap Select... on the right.
It opens the Select Fixture ID(s) Window.
Name:
This edit line displays the name of the fixture.
To edit the name, tap at the keyboard . It opens the edit name window.
If you create multiple fixtures with the same name, the name will get a consecutive number at the end of the name.
Patch:
This edit line displays the next available patch address.
To select another universe or address, tap the three dots in the edit line.
To Next Page
Loading...