Control View
The control view is the first tab of the control preset type view.
In the control view, you control the control channels of the selected fixture types.
Except the three buttons on the bottom of the view, the buttons are depending on the selected fixture types.
The three buttons at the bottom of the screen are default buttons.
The buttons above the default buttons are different depending on the fixture.
If you tap at one of these buttons, a progress bar appears until the function is finished.
It is not possible to cancel a started functions or undo it.
Lamp On (only for discharge lamps):
Tap to turn the lamp on.
Lamp Off (only for discharge lamps):
Tap to turn the lamp off.
To Next Page
Loading...