Reset:
Tap to reset the selected fixture corresponding to the reset function of the selected fixture type.
Raw Control Views
The raw control views, e.g. Lamp, Reset, are located after the first tab in the control preset type view.
In the raw control view, you control the raw control channel values in natural values (0-100) of the selected fixtures.
Encoder Bar Functions
The encoder bar is only visible in the raw control views.
It displays the respective raw channel depending on the selected slider.
To select the value, turn the encoder left or right.
To change the encoder speed to slow, press the encoder key .
To change the encoder speed to ultra slow, press and hold the key and press the encoder key .
To open the calculator, press the encoder.
Related Links
Preset Type Bar
Calculator
To Next Page
Loading...