Raw Position View
The raw position view is located in the second tab of the position preset type view.
In the raw position view, you control the raw position channel values in natural values of the selected fixtures.
Encoder Bar Functions
The default encoder speed is without decimal place.
To change the encoder speed to slow, press the encoder key . The encoder speed is with decimal place.
To change the encoder speed to ultra slow, press and hold the key and press the encoder key . The
encoder speed equals one DMX step.
Pan (°)/Pan:
To select the value of Pan, turn the encoder left or right.
To open the calculator, press the encoder.
Tilt (°)/Tilt:
To select the value of Tilt, turn the encoder left or right.
To open the calculator, press the encoder.
Related Links
Preset Type Bar
Calculator
What is Presets?
Align Key
To Next Page
Loading...
Need help?
General