Home: To bring the pan and tilt to the center position, tap Home .
There are six different align functions.
Align is a function to adjust the position values from the fixtures in the selected order.
Align >: To adjust from high to small.
Align <: To adjust from small to high.
Align ><: To adjust from the high to small to the middle and from the middle from small to high.
Align <>: To adjust from the small to high to the middle and from the middle from high to small.
Wings: This is only for pan attributes to split from the middle into two groups.
The first fixture type is in group 1 and follows the entered pan values.
The last fixture type is in group 2 and acts mirror inverted.
No align: To adjust equally. Align function is off.
Raw Position View
To Next Page
Loading...