MA dot2 User Manual

© 2015 MA Lighting Technology GmbH - Dachdeckerstr. 16 - D-97297 Waldbüttelbrunn - Germany - www.malighting.com
dot2 User Manual
tap Add New Fixtures, tap at the last field Patch the Select button.
The Select DMX Address... Window opens.
In this window, you patch fixtures and select a DMX address.
Below the title bar is the green edit line.
To jump to a DMX address, type the DMX address in the edit line.
The edit line displays also the selected DMX address from the table.
To confirm a selected DMX address, press in the title bar. The window closes and you are back in the previous
window.
To leave the DMX Address Window, press in the title bar. You are back in the previous window.
Universe Overview
280

MA dot2 Specifications

General

Brand	MA Lighting
Operating System	dot2 OS
Category	Lighting Console
Protocols	Art-Net, sACN
DMX Channels	4096
Ethernet Ports	2
Power Supply	100-240V, 50/60Hz