To select the display language, tap at Language.
To make a software update, tap at Software Update.
Network
In the column DMX/Network are settings regarding the DMX/Network.
To select the network interface for the dot2 onPC, tap at Network Interface.
To connect external wings, tap at dot2 Wings.
To connect the dot2 to another console or to the dot2 3D, tap at Sessions.
To select further network protocols, tap at Network Protocols.
Encoder Bar Functions
Select:
To select a function, turn the encoder left or right.
To confirm a selected function, press or tap the encoder.
6.67. Shapers Preset Type View
To go to the Shapers Preset Type View, tap Shapers in the Preset Type Bar.
- or -
Press and hold and press 8 , for preset type 8 (= Shapers).
To open the shapers effects view, tap at in the title bar.
To Next Page
Loading...
Need help?
General