Show Path:
Displays the file path where the show file is saved in.
Related Links
Setup
Network Interface Window
6.73. Time defaults Window
To open the time defaults window, press Time on the console.
The time defaults window opens at screen 1.
In this window, you can set default timing for cues and preset types.
If a default timing is set, this time is always used for the following actions, e.g. store a cue.
If a time default is set and you try to store a cue, the Time key will blinking to remind you at the stored
time defaults.
To leave the time defaults window, tap at the title bar or press Esc on the console.
Cue Timing
To Next Page
Loading...