7.23. Fixture Command
This page describes the syntax and how to use the fixture command.
To go to the fixture command, press Fixture on the console.
Description
With the fixture command you select fixtures in the fixtures view.
Syntax
Select fixtures.
Fixture 10
Example 1
Let´s assume, you will select all dimmers fixtures 1 thru 10.
Press Fixture 1 Thru 10 Please .
All fixtures from 1 to 10 are selected in the fixtures view.
Example 2
Let´s assume, you will just select subfixture 5 of the fixture cluster 11.
Press Fixture 11 . 5 Please .
Subfixture 5 of fixture cluster 11 is selected in the fixtures view.
Related Links
Fixtures View
Fixture Key
System Colors
7.24. Flash Command
To Next Page
Loading...