The full command will be directly executed.
The values of the fixtures 1 thru 3 are set to 100 % and they are active in the programmer.
Example 3
Let´s assume you will set the intensity of the executor 1 to 100 %.
This is the same if you would move the fader of executor 1 upwards to the top (= 100 %).
The physical fader doesn´t move.
To grab the fader after the executed full command, move the fader once to the top by yourself.
The fader works again.
Press Exec 1 Full .
The full command will be directly executed.
The intensity of the executor is set to 100 %.
Related Links
Full Key
Command History
What is a Programmer?
7.26. FullHighlight Command
To Next Page
Loading...