EasyManuals Logo

MA dot2 User Manual

MA dot2
448 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #368 background imageLoading...
Page #368 background image
© 2015 MA Lighting Technology GmbH - Dachdeckerstr. 16 - D-97297 Waldbüttelbrunn - Germany - www.malighting.com
dot2 User Manual
7.28. GoBack Command
This page describes the syntax and how to use the GoBack command.
To go to the GoBack command, press the small Go - on the console.
Description
With the GoBack command, you go back to the previous cue on a cue list.
Syntax
Go back to the previous cue on a cue list.
GoBack
Example
Let´s assume, the executor 1 is running and you will go back to the previous cue on the cue list stored on executor
1.
There are two ways to do this.
a) Press the small Go - (= GoBack) and the respective executor button .
b) Press the small Go - (= GoBack) and tap on the respective executor in the executor bar view.
The previous cue is running.
Related Links
Small Go - Key
Executor Bar View
7.29. Goto Command
This page describes the syntax and how to use the Goto command.
To go to the Goto command, press the Goto on the console.
Description
With the Goto command, you go to a specific cue on an executor
directly along with the cue timings
with fade time
Syntax
1. Go to cue 2 on executor 1.
Goto Cue 2 Executor 1
368

Table of Contents

Other manuals for MA dot2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MA dot2 and is the answer not in the manual?

MA dot2 Specifications

General IconGeneral
BrandMA Lighting
Operating Systemdot2 OS
CategoryLighting Console
ProtocolsArt-Net, sACN
DMX Channels4096
Ethernet Ports2
Power Supply100-240V, 50/60Hz