Example 2
Let´s assume, you will select all fixtures with a current dimmer output between 50 and 75.
Press If (= IfOutput) At 50 Thru 75 Please .
All fixtures with a current dimmer output between 50 and 75 are selected.
Example 3
Let´s assume, you will select all fixtures using currently the color preset "cyan" (4.2) to give them a new color preset
"orange".
There are two ways to do this:
a) Press If (= IfOutput) and tap at preset "Cyan" in the color presets pool.
b) Press If (= IfOutput) Preset 4 (= preset pool color) . 2 (= second preset in the color preset pool) Please .
All fixtures using currently color preset "Cyan" (4.2) are selected and it is easy to give them another color preset.
Related Links
If Key
Fixtures View
7.34. Invert Command
This page describes the syntax and how to use the Invert command.
To go to the Invert command, press Macro on the console and tap at Macro 22 "Invert".
Invert is in the command line.
Description
With the invert command you can
select fixtures which are currently not selected in the fixtures view
deselect fixtures which are currently selected in the fixtures view
Syntax
1. Invert all fixtures in group 1.
Invert Group 1
2. Invert fixture selection.
Invert Fixture 1 Thru 3
Example 1
To Next Page
Loading...
Need help?
General