7.37. Macro Command
This page describes the syntax and how to use the marco command.
To go to the macro command, press Macro on the console.
Description
With the macro command, you start a macro from the macro pool.
Syntax
Start a macro.
Macro 1
Example
Let´s assume, you will start macro 1 (e.g. +5 %) to the selected fixtures.
Press Macro 1 Please .
Macro 1 is started.
Related Links
Macro Key
Macro Pool
7.38. Move Command
This page describes the syntax and how to use the move command.
To go to the move command, press Move on the console.
Description
With the move command you can move objects e.g.
groups to another position in the groups pool
presets to another position in the presets pool
executors to another position in the executor pool or to another page pool
Syntax
1. Move a group to another position.
Move Group 1 At 3
2. Move a preset to another position.
To Next Page
Loading...
Need help?
General