7.36. Learn Command
This page describes the syntax and how to use the learn command.
To go to the learn command, press Speed on the console.
Learn is in the command line now.
Learn
Description
With the learn command you set the speed by tapping for
chaser
effects
rate master
Syntax
Set the speed of objects by tapping.
Learn
Example 1
Let´s assume, you will set the speed of a chaser.
Press and hold Speed (= Learn) and press the executor button of the chaser several times in that speed you like to
have it.
The chaser learns the speed of the tapping of the executor button.
Example 2
Let´s assume, you will set the speed of an effect.
Press and hold Speed (= Learn) and press the executor button of the effect several times in that speed you like to
have it.
The effect learns the speed of the tapping of the executor button.
Example 3
Let´s assume, you will set the speed of the rate master.
Press and hold Speed (= Learn) and press the executor button of the rate master several times in that speed you
like to have it.
The rate master learns the speed of the tapping of the executor button.
Related Links
Speed Key