To Next Page

To Previous Page

dot2 User Manual

4. Remove fixtures along with their values from the programmer in the fixtures view.

Off Fixture 3

Example 1

Let´s assume, you will turn executor 1 off.

There are three ways to do this.

a) Press Off , and the respective executor button .

b) Press Off Exec 1 Please .

c) Press Off , and tap the respective executor button in the executor bar view.

Executor 1 is off.

Example 2

Let´s assume, you will turn executor 1 off with a fade time of 2 seconds.

Press Off Exec 1 Time (=Fade) 2 Please .

Executor 1 will go off by a fade time of 2 seconds.

Example 3

Let´s assume, you will turn off all normal executors with a cue list.

Press Off Thru Please .

All normal executors with a cue list are off.

Example 4

Let´s assume, you have selected the fixtures 1 thru 10 and you will remove fixture 5 along with their values from the

programmer in the fixtures view.

There are two ways to do this:

a) Press Off and then tap on fixture 5 in the fixtures view.

b) Press Off Fixture 5 Please .

Fixture 5 and their values are removed from the selection.

MA dot2 User Manual

Other manuals for MA dot2