Parked DMX channels are displayed with a blue background in the DMX view.
If you want to unpark DMX channels, open the tools window.
Syntax
1. Park the the current values of a fixture.
Park Fixture 1
2. Park all attributes of fixture 1 at 100 %.
Park Fixture 1 At 100
3. Park the values of the dimmer preset type of the current fixture selection.
Park PresetType Dimmer
4. Park a specific DMX channel.
Park DMX 1.1
Example 1
Let´s assume you will park the current values of fixture 1.
There are two ways to do this:
a) Press and hold + Pause (=Park) and tap at fixture 1 in the fixtures view.
b) Press and hold + Pause (=Park) Fixture 1 Please .
Example 2
Let´s assume you will park all attributes of fixture 1 at 100 %.
Press and hold + Pause (=Park) Fixture 1 At 1 0 0 Please .
All attributes of fixture 1 are parked at 100 %.
Example 3
Let´s assume you will park all dimmer values of the current fixture selection.
There are two ways to do this:
a) Press and hold + Pause (=Park) and tap at Dimmer in the preset type bar.
b) Press and hold + Pause (=Park) + Preset (=PresetType) and enter in the command line the word
To Next Page
Loading...