Example 2
Let´s assume you will set the intensity of the fixtures 1 thru 3 to zero.
Make sure, that no fixtures are selected. If fixtures are selected, the zero command will be always
execute to all selected fixtures.
Press Fixture 1 Thru 3 . . .
The Zero command will be directly executed.
The values of the fixtures 1 thru 3 are zero.
Example 3
Let´s assume you will set the intensity of the fixtures from the executor 1 to zero.
This function works only for executor in the executor pool and not for the main executor.
The physical fader doesn´t move.
Press Exec 1 . . .
The values from the fixtures of the executor 1 are set to zero.
Related Links
[dot] Key
Command History
To Next Page
Loading...