Fader Wing:
Is an extension for the console with additional faders and executor buttons.
Fixture ID:
Unique identifier for each fixture. You set the fixture ID in the Patch and Fixture Schedule.
Fixture Library:
Library with all common fixture types to import fixture types into the show file. Refer to, Import Fixture Type Window.
Fixture Type:
Every device you can control from the console. In the fixture type is the assignment of the attributes to the DMX
channels.
Flip:
Flip is a function to change the pan and tilt combination and point your fixture in the same direction. Refer to,
Position Preset Type View.
Frame (fps = frames per second):
Is a picture frequency. The default setting is 30 fps. From this follows that 1 frame is equivalent to 0.03 seconds.
Refer to, Calculator View.
G
Grand master:
Fader rightmost at the console to reduce all dimmer values. Refer to, Getting Started Guide - Physical Setup and
Layout.
Group:
To have a quick selection, store selected fixtures in groups. Refer to, Groups View.
H
Hue:
The color of a color notation in an angle between 0 and 360 degrees.
I
Instances:
Single controls of the fixture types, e.g. one pixel of a LED panel. Refer to, Import Fixture Type... Window.
Iris:
An aperture that controls the beam size of a fixture.
M
Macro:
Prerecorded command combinations.
MIDI (musical instrument digital interface):
A standard to exchange control signals with the console. Refer to, Remote Inputs Configuration Window.
To Next Page
Loading...