Medoc PATHWAY - Users

Pathway Technical Reference Manual
Proprietary 111 of 190
To apply changes to the Patient Field Settings click the Apply button
To restore the default Patient Field Settings click the Restore button
10.1.5 Button Configuration
Configure the behavior of the “New Test” button at the end of a test.
The New Test button closes the Test Screen and return to the Test Navigator. By default it
does not clear the selected Patient, Program or Body site. It is possible to configure the button
to clear all or part of the above selections.
Figure 75: Buttons Configuration Tab
To access Button Configuration option: from the top menu bar, select Settings and then
Software Settings. In the Software Settings window that opens, select the Button
Configurations tab.
Select which actions should be taken when the New Test button is pressed and click the
Apply button to save the changes.
10.1.6 Users
User management enables you manage and restrict the access of specific users to certain
features of the software. For example, restrict a test operator from accidently deleting patient
records.
There are four available authorization levels: Software Administrator; Biomedical Engineer;
Medical Supervisor and Operator. See
The following table lists the main functions and operations available in Medoc Main Station
software and specifies which functions are available for each user authorization level.
Table 26See Table 26 for a list of the main functions allowed or restricted according for each
user level.