Medoc PATHWAY - Figure 35: Program Editor Next Sequence Definition; Next Sequence Definition

Pathway Technical Reference Manual
Proprietary 70 of 190
View program revision history by version date and username.
Edit text and audio instructions. Refer to section 7.10, page 88
Exit Program Editor screen
Copy the selected sequence
Paste the copied sequence
Insert a new sequence at the end of the test
Insert a new sequence after the selected sequence
Delete the selected sequence
Preview the temperature graph
Check that all program parameters are valid
When adding or editing programs, follow these rules:
1. Enter meaningful information in the Program Description section of the
screen.
2. Define all the parameters of a sequence for that sequence to be valid.
3. If not all the sequences are displayed, use the horizontal scroll bar to
display the ones that are out of sight.
Missing or incorrect parameters are highlighted by an icon next to the
relevant field. A short description of the problem is displayed when holding
the cursor over the relevant icon.
7.6.1 Next Sequence Definition
In Limits, TSL, Ramp & Hold, Pulses and Search protocols additional settings are available in
the top part of program editor, allowing different options for next sequence definition during
the program run:
Figure 35: Program Editor Next Sequence Definition
Two checkboxes are available and unchecked by default:
- Randomize Sequences: If this checkbox is checked the sequences order during
program run will be randomized