Pathway Technical Reference Manual
Proprietary 148 of 190
7. At the end of the test, the results will be saved automatically and Medoc Main Station will
return to the Program selection screen and wait for the next program command.
Figure 104: Listening mode
14.5.6 Safe Mode
Medoc Main Station will not receive commands from the external application (except for ‘Get
Status’ command in TCP communication) if for any reason PATHWAY system is in Safe Mode. If
PATHWAY system is in safe mode, the Operator must use Medoc Main Station software directly
to resolve the problem and run a system Self-Test before External Control can be resumed.
To Next Page
Loading...