Medoc PATHWAY - MRI Conditional Accessories; Table 40: MRI Conditional Accessories

Pathway Technical Reference Manual
Proprietary 169 of 190
20.3 MRI Conditional Accessories
Table 40: MRI Conditional Accessories
Description
Cat. No.
MRI Conditional CHEPS Thermode
The Thermode is MRI conditional, and
comprised of non-magnetic / low
magnetic components. The Thermode has
an extended cable length of 10 meters to
allow the required distance between the
system, located outside the MRI room,
and the Thermode active area attached to
the subject. The MRI Conditional
Thermode requires the use of the CHEPS
EMI filter (see AS 00249)
AS 00253
MRI Conditional ATS Thermode
30x30mm
The Thermode is MRI conditional, and
comprised of non-magnetic / low
magnetic components. The Thermode has
an extended cable length of 10 meters to
allow the required distance between the
system, located outside the MRI room,
and the Thermode active area attached to
the subject. The MRI Conditional
Thermode requires the use of the ATS
EMI filter (see AS 00254)
AS 00251
MRI Conditional ATS Thermode
16x16mm
The Thermode is MRI conditional, and
comprised of non-magnetic / low
magnetic components. The Thermode has
an extended cable length of 10 meters to
allow the required distance between the
system, located outside the MRI room,
and the Thermode active area attached to
the subject. The MRI Conditional
Thermode requires the use of the ATS
EMI filter (see AS 00254)
AS 00252
MRI Conditional Response Unit
MRI conditional version of the Patient
Response Unit which can be used inside
the MRI room. Includes an extended cable
length of 10 meters.
AS 00244