Pathway Technical Reference Manual
Proprietary 127 of 190
10.3.5 4-Bit TTL Configuration
Configure the 4-bit TTL words which can be used to synchronize between test events and
external systems or applications.
To access the 4-bit TTL Configuration: from the top menu bar, select Settings and then Test
Settings. In the Test Settings windows that opens, select the 4-bit TTL Configuration tab.
The following window is displayed:
Figure 86: 4-Bit TTL Configuration
4-bit TTL words can be assigned to Standard Events and Temperature Events. To assign or
change the current assignment of a 4-bit word, select the required event from the drop-down
list.
Note that it is not possible to assign the same event to more than one 4-bit TTL word.
To restore the default settings click the Default button.
For more information about events see:
Standard Events section 7.8
Temperature Events section 7.9
To Next Page
Loading...