Medoc PATHWAY - Table 25: Authorization Parameters

Pathway Technical Reference Manual
Proprietary 112 of 190
To access User Management Configuration option: from the top menu bar, select Settings and
then Software Settings. In the Software Settings window that opens, select the Button
Configurations tab.
10.1.6.1 Add/Remove Users
1. Click the add user button at the bottom of the user list.
2. Enter the relevant information, according to the table below.
3. From the Change role drop-down menu, select the required authorization level.
4. If you want to change the user’s authorization level, select the required user from the list;
then from the Change role drop-down menu, choose the required authorization level.
5. Click the Apply button to save changes.
6. To remove a user from an authorization list, click the remove button.
The following table describes the fields for creating a new user:
Table 25: Authorization Parameters
Parameter
Description
User name
User name used to log on to the Main Station and
differentiate from other users.
Last name \ First
name
The users full name
Change role
Select the authorization level for the user
New password
Set a password for the user to use when logging on to
the Main Station
Confirm password
Password confirmation field.
A user cannot create new users with an authorization level higher than
his/hers own authorization level.